Uses of Class
com.openinventor.inventor.fields.SoSFFloat

Packages that use SoSFFloat

Package	Description
com.openinventor.directviz	DirectViz is a ray-tracing extension for Open Inventor.
com.openinventor.fxviz.nodes
com.openinventor.imageviz.engines.arithmeticandlogic.arithmeticoperations	The Arithmetics Operations category contains operations between two images or between an image and a constant as sum, difference, blending, minimum or maximum.
com.openinventor.imageviz.engines.edgedetection.gradient	Introduction to Gradient
com.openinventor.imageviz.engines.geometryandmatching.geometrictransforms	Geometric Transforms engines are usually used to align images.
com.openinventor.imageviz.engines.imageanalysis.globalmeasures	The Global Measures category contains analysis engines a measurement globally to the input image.
com.openinventor.imageviz.engines.imageanalysis.morphometry	The purpose of Morphometry category is to calculate morphometric parameters either in 3D based on a volume model, or in 2D from crossection images (individually or integrated over a volume-of-interest).
com.openinventor.imageviz.engines.imageanalysis.statistics	The Statistics category contains analysis engines applying an intensity- based measurement globally to the input image.
com.openinventor.imageviz.engines.imagefiltering.grayscaletransforms	The Grayscale Transforms category contains gray level transformations such as histogram equalization and intensity rescaling operations.
com.openinventor.imageviz.engines.imagefiltering.sharpening	The Sharpening category contains filters used to enhance the edges of objects and adjust contrast and shade characteristics.
com.openinventor.imageviz.engines.imagefiltering.smoothinganddenoising	The Smoothing And Denoising category contains lowpass filters to reduce the contrast and soften the edges of objects in an image.
com.openinventor.imageviz.engines.imagefiltering.texturefilters	This category contains engines revealing texture attributes.
com.openinventor.imageviz.engines.imagemanipulation.imageediting
com.openinventor.imageviz.engines.imagemanipulation.syntheticimages
com.openinventor.imageviz.engines.imagesegmentation.binarization	Binarization allows to transform graylevel or color images into a binary image.
com.openinventor.imageviz.engines.imagesegmentation.computationalgeometry	This group contains engines capable of transforming images into geometric objects.
com.openinventor.imageviz.engines.imagesegmentation.featureselection
com.openinventor.imageviz.engines.imagesegmentation.labeling
com.openinventor.imageviz.engines.mathematicalmorphology.distancemaps	Geodesy Principle
com.openinventor.imageviz.engines.mathematicalmorphology.erosionanddilation	Introduction to Erosion
com.openinventor.imageviz.engines.mathematicalmorphology.openingandclosing	Introduction to Opening
com.openinventor.imageviz.nodes.measures	Introduction
com.openinventor.inventor.draggers
com.openinventor.inventor.engines
com.openinventor.inventor.geo
com.openinventor.inventor.nodes
com.openinventor.inventor.vrmlnodes	Virtual Reality Modeling Language.
com.openinventor.ldm.nodes
com.openinventor.medical.nodes	Provides some nodes and helper classes specifically created to facilitate implementation of medical applications.
com.openinventor.meshviz.data
com.openinventor.meshviz.graph
com.openinventor.meshviz.nodes
com.openinventor.meshvizxlm.mapping.nodes	Provides rendering, property and action nodes.
com.openinventor.scaleviz.awt
com.openinventor.scaleviz.nodes
com.openinventor.volumeviz.nodes

Uses of SoSFFloat in com.openinventor.directviz

Fields in com.openinventor.directviz declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoDirectVizManager.envLightIntensityScale Deprecated. Intensity scale applied to environment lights defined by numEnvLights.
SoSFFloat	SoDirectVizManager.subSamplingFactor Deprecated. Specifies the sub-sampling factor.

Uses of SoSFFloat in com.openinventor.fxviz.nodes

Fields in com.openinventor.fxviz.nodes declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoParticleAnimation.endOpacity Deprecated. Final particle opacity: 0 = fully transparent, 1 = opaque.
SoSFFloat	SoParticleAnimation.endOpacityVariation Deprecated. Controls magnitude of random variation in the final particle opacity.
SoSFFloat	SoParticleAnimation.endSize Deprecated. Final particle size in world coordinates.
SoSFFloat	SoParticleAnimation.endSizeVariation Deprecated. Controls magnitude of random variation in the final particle size.
SoSFFloat	SoParticleAnimation.goalFramesPerSecond Deprecated. Indicates the goal number of frames per second for refreshing the particles.
SoSFFloat	SoParticleAnimation.initialOpacity Deprecated. Initial particle opacity: 0 is fully transparent, 1 is opaque.
SoSFFloat	SoParticleAnimation.initialOpacityVariation Deprecated. Controls magnitude of random variation in the initial particle opacity.
SoSFFloat	SoParticleAnimation.initialSize Deprecated. Initial particle size in world coordinates.
SoSFFloat	SoParticleAnimation.initialSizeVariation Deprecated. Controls magnitude of random variation in the initial particle size.
SoSFFloat	SoParticleAnimation.lifeSpanVariation Deprecated. Controls magnitude of random variation in the particle life span.
SoSFFloat	SoParticleAnimation.numParticlesVariation Deprecated. Controls magnitude of random variation in the number of emitted particles.
SoSFFloat	SoParticleAnimation.speed Deprecated. Specifies the particle speed in units per second.
SoSFFloat	SoParticleAnimation.speedVariation Deprecated. Controls magnitude of random variation in the particle speed.

Uses of SoSFFloat in com.openinventor.imageviz.engines.arithmeticandlogic.arithmeticoperations

Fields in com.openinventor.imageviz.engines.arithmeticandlogic.arithmeticoperations declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoArithmeticValueProcessing.operandValue The operand value.
SoSFFloat	SoBlendWithImageProcessing.weight The percentage of first image intensity.
SoSFFloat	SoBlendWithValueProcessing.weight The percentage of first image intensity.

Uses of SoSFFloat in com.openinventor.imageviz.engines.edgedetection.gradient

Fields in com.openinventor.imageviz.engines.edgedetection.gradient declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoGradientOperatorProcessing2d.standardDeviation The standard deviation.
SoSFFloat	SoGradientOperatorProcessing3d.standardDeviation The standard deviation.

Uses of SoSFFloat in com.openinventor.imageviz.engines.geometryandmatching.geometrictransforms

Fields in com.openinventor.imageviz.engines.geometryandmatching.geometrictransforms declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoTranslateProcessing.backgroundValue Background value.
SoSFFloat	SoRotateAroundZProcessing2d.rotationAngle The angle of the rotation in degrees (not radians).
SoSFFloat	SoRotateProcessing2d.rotationAngle The angle of the rotation in degrees (not radians).
SoSFFloat	SoRotateProcessing3d.rotationAngleX The angle of rotation in degrees (not radians) for the OX axis.
SoSFFloat	SoRotateProcessing3d.rotationAngleY The angle of rotation in degrees (not radians) for the OY axis.
SoSFFloat	SoRotateProcessing3d.rotationAngleZ The angle of rotation in degrees (not radians) for the OZ axis.
SoSFFloat	SoScaleByFactorProcessing.scaleFactor The zoom factor.

Uses of SoSFFloat in com.openinventor.imageviz.engines.imageanalysis.globalmeasures

Fields in com.openinventor.imageviz.engines.imageanalysis.globalmeasures declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoIntensityBinHistogramQuantification.binSize The size of a class of the histogram.

Uses of SoSFFloat in com.openinventor.imageviz.engines.imageanalysis.morphometry

Fields in com.openinventor.imageviz.engines.imageanalysis.morphometry declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoInertiaMomentProcessing2d.rotationAngle The orientation of the rotation axis in degrees (not radians).

Uses of SoSFFloat in com.openinventor.imageviz.engines.imageanalysis.statistics

Fields in com.openinventor.imageviz.engines.imageanalysis.statistics declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoCompareValueQuantification.operandValue The floating value to compare.
SoSFFloat	SoLocalMaximaQuantification.thresholdLevel Threshold.

Uses of SoSFFloat in com.openinventor.imageviz.engines.imagefiltering.grayscaletransforms

Fields in com.openinventor.imageviz.engines.imagefiltering.grayscaletransforms declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoShadingCorrectionProcessing.normalizationFactor The normalization factor.

Uses of SoSFFloat in com.openinventor.imageviz.engines.imagefiltering.sharpening

Fields in com.openinventor.imageviz.engines.imagefiltering.sharpening declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoUnsharpMaskingProcessing.brightnessThreshold The minimum brightness threshold.
SoSFFloat	SoUnsharpMaskingProcessing.edgeContrast The contrast amount added at the edges.
SoSFFloat	SoUnsharpMaskingProcessing.edgeSize Radius of the desired edges.
SoSFFloat	SoDeblurProcessing2d.sharpeningFactor The sharpening factor.

Uses of SoSFFloat in com.openinventor.imageviz.engines.imagefiltering.smoothinganddenoising

Fields in com.openinventor.imageviz.engines.imagefiltering.smoothinganddenoising declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoCurvatureDrivenDiffusionProcessing.anisotropyFactor The anisotropy factor.
SoSFFloat	SoGaussianBlurFilterProcessing.kernelSizeFactor This parameter is used to compute the size of the kernel applied in the SEPARABLE mode.
SoSFFloat	SoCurvatureDrivenDiffusionProcessing.sharpnessFactor The sharpness factor.
SoSFFloat	SoBilateralFilterProcessing.similarity The photometric similarity (strictly positive value).
SoSFFloat	SoNonLocalMeansFilterProcessing.similarity The similarity is used to compute weight assigned to each voxel in the search window (see expression of ).
SoSFFloat	SoFlowInpaintingProcessing.standardDeviation The standard deviation.
SoSFFloat	SoSigmaFilterProcessing.standardDeviation The standard deviation.
SoSFFloat	SoDespeckleProcessing.thresholdFactor Stddev threshold factor (strictly positive value).

Uses of SoSFFloat in com.openinventor.imageviz.engines.imagefiltering.texturefilters

Fields in com.openinventor.imageviz.engines.imagefiltering.texturefilters declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoImageCurvatureProcessing2d.standardDeviation The standard deviation for Gaussian filter.
SoSFFloat	SoImageCurvatureProcessing3d.standardDeviation The standard deviation for Gaussian filter.
SoSFFloat	SoMultiscaleStructureEnhancementProcessing2d.standardDeviationStep Standard deviation step.
SoSFFloat	SoMultiscaleStructureEnhancementProcessing3d.standardDeviationStep Standard deviation step.

Uses of SoSFFloat in com.openinventor.imageviz.engines.imagemanipulation.imageediting

Fields in com.openinventor.imageviz.engines.imagemanipulation.imageediting declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoGetObliquePlaneFromVolumeProcessing3d.anglePhi The angle in degree between the Normal and the OZ axis (phi).
SoSFFloat	SoGetObliquePlaneFromVolumeProcessing3d.angleTheta The angle between Ox and the projection of the Normal on XoY plane (theta).
SoSFFloat	SoResetImageProcessing.intensityValue The reset intensity value.

Uses of SoSFFloat in com.openinventor.imageviz.engines.imagemanipulation.syntheticimages

Fields in com.openinventor.imageviz.engines.imagemanipulation.syntheticimages declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoRandomImageGeneration.intensityMean The output intensity range of random values.
SoSFFloat	SoRandomImageGeneration.intensityRangeOutput The standard deviation.

Uses of SoSFFloat in com.openinventor.imageviz.engines.imagesegmentation.binarization

Fields in com.openinventor.imageviz.engines.imagesegmentation.binarization declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoThresholdingByCriterionProcessing.comparisonValue Threshold level.
SoSFFloat	SoLocalAdaptiveThresholdProcessing.threshold Enter a floating value Default value is 1.0f.

Uses of SoSFFloat in com.openinventor.imageviz.engines.imagesegmentation.computationalgeometry

Fields in com.openinventor.imageviz.engines.imagesegmentation.computationalgeometry declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoObjectToSegmentApproximation2d.maxDistance The maximum distance in pixels between curve and segment.

Uses of SoSFFloat in com.openinventor.imageviz.engines.imagesegmentation.featureselection

Fields in com.openinventor.imageviz.engines.imagesegmentation.featureselection declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoRemoveSmallHolesProcessing.holeSize The maximum size of holes to delete (in pixel).
SoSFFloat	SoRemoveSmallSpotsProcessing.objectSize The maximum size of objects to delete.

Uses of SoSFFloat in com.openinventor.imageviz.engines.imagesegmentation.labeling

Fields in com.openinventor.imageviz.engines.imagesegmentation.labeling declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoGroupCloseLabelslProcessing2d.maxDistance The maximal distance for grouping objects.

Uses of SoSFFloat in com.openinventor.imageviz.engines.mathematicalmorphology.distancemaps

Fields in com.openinventor.imageviz.engines.mathematicalmorphology.distancemaps declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoChamferDistanceMapProcessing3d.cornerDistance The distance between 2 pixels with min 3D connexity.
SoSFFloat	SoChamferDistanceMapProcessing3d.edgeDistance The distance between 2 pixels with middle 3D connexity.
SoSFFloat	SoChamferDistanceMapProcessing3d.faceDistance The distance between 2 pixels with max 3D connexity.

Uses of SoSFFloat in com.openinventor.imageviz.engines.mathematicalmorphology.erosionanddilation

Fields in com.openinventor.imageviz.engines.mathematicalmorphology.erosionanddilation declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoDilationLineProcessing2d.orientationAngle The angle of orientation in degrees (not radians).
SoSFFloat	SoErosionLineProcessing2d.orientationAngle The angle of orientation in degrees (not radians).
SoSFFloat	SoDilationDiskProcessing3d.phiAngle The angle of orientation around projected OY axis in degrees (not radians).
SoSFFloat	SoDilationLineProcessing3d.phiAngle The angle of orientation around projected OY axis in degrees (not radians).
SoSFFloat	SoErosionDiskProcessing3d.phiAngle The angle of orientation around projected OY axis in degrees (not radians).
SoSFFloat	SoErosionLineProcessing3d.phiAngle The angle of orientation around projected OY axis in degrees (not radians).
SoSFFloat	SoDilationDiskProcessing3d.thetaAngle The angle of orientation around OZ axis in degrees (not radians).
SoSFFloat	SoDilationLineProcessing3d.thetaAngle The angle of orientation around OZ axis in degrees (not radians).
SoSFFloat	SoErosionDiskProcessing3d.thetaAngle The angle of orientation around OZ axis in degrees (not radians).
SoSFFloat	SoErosionLineProcessing3d.thetaAngle The angle of orientation around OZ axis in degrees (not radians).

Uses of SoSFFloat in com.openinventor.imageviz.engines.mathematicalmorphology.openingandclosing

Fields in com.openinventor.imageviz.engines.mathematicalmorphology.openingandclosing declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoClosingLineProcessing2d.orientationAngle The angle of orientation in degrees (not radians).
SoSFFloat	SoOpeningLineProcessing2d.orientationAngle The angle of orientation in degrees (not radians).
SoSFFloat	SoClosingDiskProcessing3d.phiAngle The angle of orientation around projected OY axis in degrees (not radians).
SoSFFloat	SoClosingLineProcessing3d.phiAngle The angle of orientation around projected OY axis in degrees (not radians).
SoSFFloat	SoOpeningDiskProcessing3d.phiAngle The angle of orientation around projected OY axis in degrees (not radians).
SoSFFloat	SoOpeningLineProcessing3d.phiAngle The angle of orientation around projected OY axis in degrees (not radians).
SoSFFloat	SoClosingDiskProcessing3d.thetaAngle The angle of orientation around OZ axis in degrees (not radians).
SoSFFloat	SoClosingLineProcessing3d.thetaAngle The angle of orientation around OZ axis in degrees (not radians).
SoSFFloat	SoOpeningDiskProcessing3d.thetaAngle The angle of orientation around OZ axis in degrees (not radians).
SoSFFloat	SoOpeningLineProcessing3d.thetaAngle The angle of orientation around OZ axis in degrees (not radians).

Uses of SoSFFloat in com.openinventor.imageviz.nodes.measures

Fields in com.openinventor.imageviz.nodes.measures declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoDataMeasureAttributes.histogramBinSize Size of bins for histogram measures.
SoSFFloat	SoDataMeasureAttributes.histogramMaxGrayLevel Maximum gray level for histogram measures.
SoSFFloat	SoDataMeasureAttributes.histogramMinGrayLevel Minimum gray level for histogram measures.
SoSFFloat	SoDataMeasureAttributes.neighborDistance Distance to the current label boundaries where neighbors are searched (cut-off distance).
SoSFFloat	SoDataMeasureAttributes.overlap Minimal percentage that must represent a label volume overlapping the searched area to be counted as a neighbor.

Uses of SoSFFloat in com.openinventor.inventor.draggers

Fields in com.openinventor.inventor.draggers declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoSpotLightDragger.angle Angle between center and edge of beam.
SoSFFloat	SoTabPlaneDragger.lineWidth Specifies the line width for the outline box.
SoSFFloat	SoTransformerDragger.minDiscRotDot Specifies the minimum dot product between eyeDir and rotPlane normal before switching from record-player-type rotation to rolling-pin-type rotation.

Uses of SoSFFloat in com.openinventor.inventor.engines

Fields in com.openinventor.inventor.engines declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoInterpolate.alpha Interpolation control value.
SoSFFloat	SoTrackFollower.alpha The value on which the interpolation is made.
SoSFFloat	SoTimeCounter.frequency Number of min-to-max cycles per second.
SoSFFloat	SoElapsedTime.speed Scale factor for time.

Uses of SoSFFloat in com.openinventor.inventor.geo

Fields in com.openinventor.inventor.geo declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoGeoLOD.range World-space distance to use as switching criteria.
SoSFFloat	SoVRMLGeoLOD.range Deprecated. World-space distance to use as switching criteria.
SoSFFloat	SoVRMLGeoViewpoint.speedFactor Deprecated. (Note: Not implemented) A multiplier
SoSFFloat	SoGeoElevationGrid.xSpacing Spacing between X values.
SoSFFloat	SoGeoElevationGrid.yScale The yScale value can be used to produce a vertical exaggeration of the data when it is displayed.
SoSFFloat	SoVRMLGeoElevationGrid.yScale Deprecated. The yScale value can be used to produce a vertical exaggeration of the data when it is displayed.
SoSFFloat	SoGeoElevationGrid.zSpacing Spacing between Z values.

Uses of SoSFFloat in com.openinventor.inventor.nodes

Fields in com.openinventor.inventor.nodes declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoTextProperty.aliasingFactor Defines the anti-aliasing factor to apply to the textured text rendering.
SoSFFloat	SoEnvironment.ambientIntensity Intensity of ambient lighting (for Phong lighting).
SoSFFloat	SoBevelProperty.angle Indicates the angle (in radians, between 0 and pi) between two adjacent face normals above which the edge will be beveled.
SoSFFloat	SoRotationXYZ.angle Rotation angle (in radians), using the right-hand rule.
SoSFFloat	SoRenderToTarget.antialiasingQuality This field defines the antialiasing quality between 0.0 and 1.0 for the rendering.
SoSFFloat	SoCamera.aspectRatio The ratio of camera viewing width to height.
SoSFFloat	SoTextProperty.backFrameLineWidth Defines the width of the line when BACK_FRAME_LINE has been enabled for the current style.
SoSFFloat	SoStereoCamera.balance The stereo balance (the position of the zero parallax plane).
SoSFFloat	SoCone.bottomRadius Specifies the radius of the base circle.
SoSFFloat	SoTextProperty.characterSpacing This field specifies the spacing between individual characters.
SoSFFloat	SoShapeHints.creaseAngle Indicates the minimum angle (in radians) between two adjacent face normals required to form a sharp crease at the edge when normal vectors are computed automatically by Open Inventor.
SoSFFloat	SoSpotLight.cutOffAngle Angle (in radians) outside of which intensity is zero, measured from the center axis of the cone to an edge.
SoSFFloat	SoCube.depth Size in the z dimension.
SoSFFloat	SoSpotLight.dropOffRate Rate of intensity drop-off per change in angle from primary direction: 0 = constant intensity, 1 = very sharp drop-off.
SoSFFloat	SoPolygonOffset.factor Specifies a scale factor that is used to create a variable depth offset for each polygon.
SoSFFloat	SoCamera.farDistance The distance from the camera viewpoint to the far clipping plane.
SoSFFloat	SoCamera.focalDistance The distance from the viewpoint to the point of focus.
SoSFFloat	SoEnvironment.fogStart Distance at which the linear fog HAZE starts to be applied.
SoSFFloat	SoEnvironment.fogVisibility Fog visibility distance, which is the distance at which fog totally obscures objects.
SoSFFloat	SoTextureCubeMap.HDRIExposure Specifies an exposure factor when using an HDRI file.
SoSFFloat	SoAlgebraicCone.height Specifies the cone's height.
SoSFFloat	SoAlgebraicCylinder.height Specifies the cylinder's height.
SoSFFloat	SoCone.height Specifies the cone's height.
SoSFFloat	SoCube.height Size in the y dimension.
SoSFFloat	SoCylinder.height Specifies the cylinder's height.
SoSFFloat	SoOrthographicCamera.height Height of the viewing volume.
SoSFFloat	SoPerspectiveCamera.heightAngle Vertical angle of the viewing volume.
SoSFFloat	SoLight.intensity Illumination intensity of light source.
SoSFFloat	SoShadowGroup.intensity Specifies the intensity of the shadow.
SoSFFloat	SoShadowGroup.lightBleedingReduction Used only for VARIANCE_SHADOW_MAP.
SoSFFloat	SoDrawStyle.lineWidth Width of lines (for LINES style).
SoSFFloat	SoTextProperty.margin Set a margin (extra space) to apply around the text string for the BACK_FRAME and BACK_FRAME_LINE styles.
SoSFFloat	SoIndexedMarkerSet.markerGlobalScale Specifies a global scale factor applied to all markers.
SoSFFloat	SoMarkerSet.markerGlobalScale Specifies a global scale factor applied to all markers.
SoSFFloat	SoColorMap.max See min.
SoSFFloat	SoTexture.maxAnisotropy Specifies on a per-texture object basis, the maximum degree of anisotropy to account for in texture filtering.
SoSFFloat	SoIndexedTexture2.maxValue See minValue.
SoSFFloat	SoColorMap.min This field allow to remap the color map such that only data values ranging from min to max will be mapped to the color map.
SoSFFloat	SoIndexedTexture2.minValue Specifies the range of values which is mapped onto the color map (see SoColorMap).
SoSFFloat	SoShadowGroup.minVariance Used only for VARIANCE_SHADOW_MAP.
SoSFFloat	SoCamera.nearDistance The distance from the camera viewpoint to the near clipping plane.
SoSFFloat	SoShapeHints.neighborTolerance Specifies the tolerance value to use when default normals are computed.
SoSFFloat	SoDepthOffset.offset Offset to apply to the projection matrix.
SoSFFloat	SoStereoCamera.offset The stereo offset (the distance of each eye from the camera position).
SoSFFloat	SoDrawStyle.pointSize Radius of points (for POINTS style).
SoSFFloat	SoShadowGroup.precision Specifies the precision of the shadow.
SoSFFloat	SoShadowGroup.quality Specifies the quality of the shadow.
SoSFFloat	SoAlgebraicCone.radius Specifies the radius of the base circle.
SoSFFloat	SoAlgebraicCylinder.radius Specifies the cylinder's radius.
SoSFFloat	SoAlgebraicSphere.radius Radius of sphere.
SoSFFloat	SoBevelProperty.radius This defines the bevel radius (the size of the rounded edge or corner).
SoSFFloat	SoCircularExtrusion.radius Radius of the circular cross-section.
SoSFFloat	SoCylinder.radius Specifies the cylinder's radius.
SoSFFloat	SoSphere.radius Radius of sphere.
SoSFFloat	SoInteractiveComplexity.refinementDelay Time in seconds after interaction stops before field values start to be increased.
SoSFFloat	SoTexture2Transform.rotation Counterclockwise rotation of the coordinate space, in radians.
SoSFFloat	SoTexture3Transform.rotation Counterclockwise rotation of the coordinate space, in radians.
SoSFFloat	SoTextureCombiner.scaleAlpha Specifies the alpha scale for the entire texture operation and may be 1.0, 2.0, or 4.0.
SoSFFloat	SoTransformProjection.scaleFactor Scale factor applied to the geometry.
SoSFFloat	SoTextureCombiner.scaleRGB Specifies the RGB scale for the entire texture operation and may be 1.0, 2.0, or 4.0.
SoSFFloat	SoFont.size This field specifies the font size.
SoSFFloat	SoAnnoText3.spacing Defines the distance (in the negative y direction) between the base points of successive strings, measured with respect to the current font height.
SoSFFloat	SoAsciiText.spacing Defines the distance (in the negative y direction) between the base points of successive strings, measured with respect to the current font height.
SoSFFloat	SoText2.spacing Defines the distance (in the negative y direction) between the base points of successive strings, measured with respect to the current font height.
SoSFFloat	SoText3.spacing Defines the distance (in the negative y direction) between the base points of successive strings, measured with respect to the current font height.
SoSFFloat	SoBlinker.speed Defines the speed of the blinker, in cycles per second.
SoSFFloat	SoPendulum.speed Defines the speed of the pendulum, in cycles per second.
SoSFFloat	SoRotor.speed Defines the speed of the rotor, in revolutions per second.
SoSFFloat	SoShuttle.speed Defines the speed of the shuttle, in cycles per second.
SoSFFloat	SoNurbsProperty.tessellationAngle Used when tessellationType is set to ADAPTIVE.
SoSFFloat	SoNurbsProperty.tessellationDistance Used when tessellationType is set to ADAPTIVE.
SoSFFloat	SoComplexity.textureQuality Hint about texture quality.
SoSFFloat	SoPolygonOffset.units Is multiplied by an OpenGL implementation-specific value to create a constant depth offset.
SoSFFloat	SoComplexity.value Complexity value.
SoSFFloat	SoShaderParameter1f.value Specifies the parameter's value.
SoSFFloat	SoShadowGroup.visibilityRadius Shadows are only computed within "visibility radius" distance from the camera position.
SoSFFloat	SoCube.width Size in the x dimension.

Uses of SoSFFloat in com.openinventor.inventor.vrmlnodes

Fields in com.openinventor.inventor.vrmlnodes declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoVRMLMovieTexture.alpha Deprecated. Alpha value used with the video.
SoSFFloat	SoVRMLMultiTexture.alpha Deprecated. The alpha value for SELECT mode operations.
SoSFFloat	SoVRMLLight.ambientIntensity Deprecated. Specifies the brightness of the ambient emissions of the light.
SoSFFloat	SoVRMLMaterial.ambientIntensity Deprecated. Specifies how much ambient light from the light sources this surface should reflect.
SoSFFloat	SoVRMLSpotLight.beamWidth Deprecated. Inner solid angle of illumination.
SoSFFloat	SoVRMLCone.bottomRadius Deprecated. Specifies the radius of the base circle; value must be greater than 0.0.
SoSFFloat	SoVRMLElevationGrid.creaseAngle Deprecated. Indicates the minimum angle (in radians) between two adjacent face normals required to form a sharp crease at the edge when default normals are computed and used.
SoSFFloat	SoVRMLExtrusion.creaseAngle Deprecated. Indicates the minimum angle (in radians) between two adjacent face normals required to form a sharp crease at the edge when default normals are computed and used.
SoSFFloat	SoVRMLIndexedFaceSet.creaseAngle Deprecated. Indicates the minimum angle (in radians) between two adjacent face normals required to form a sharp crease at the edge when default normals are computed and used.
SoSFFloat	SoVRMLSpotLight.cutOffAngle Deprecated. Outer solid angle of illumination.
SoSFFloat	SoVRMLCylinderSensor.diskAngle Deprecated. Used to determine the mapping of the dragging motion.
SoSFFloat	SoVRMLSound.dopplerFactor Deprecated. Doppler factor value.
SoSFFloat	SoVRMLSound.dopplerVelocity Deprecated. Doppler velocity value in meters/sec.
SoSFFloat	SoVRMLArc2D.endAngle Deprecated. Specifies the end angle of the arc.
SoSFFloat	SoVRMLArcClose2D.endAngle Deprecated. Specifies the end angle of the arc.
SoSFFloat	SoVRMLViewpoint.fieldOfView Deprecated. Specifies a preferred field of view from the viewpoint, in radians.
SoSFFloat	SoVRMLCone.height Deprecated. Specifies the cone's height; value must be greater than 0.0.
SoSFFloat	SoVRMLCylinder.height Deprecated.
SoSFFloat	SoVRMLDisk2D.innerRadius Deprecated. Specifies the inner radius of the disk.
SoSFFloat	SoVRMLLight.intensity Deprecated. Specifies the brightness of the direct emission from the light.
SoSFFloat	SoVRMLSound.intensity Deprecated. Adjusts the volume of each sound source.
SoSFFloat	SoVRMLLineProperties.linewidthScaleFactor Deprecated. The linewidthScaleFactor is a multiplicative value that scales a nominal linewidth by the linewidth scale factor.
SoSFFloat	SoVRMLCylinderSensor.maxAngle Deprecated. Used to clamp rotation_changed events to a range of values.
SoSFFloat	SoVRMLSound.maxBack Deprecated. (Note: Not implemented) Around the location of the emitter, minFront and minBack determine the extent of the full intensity region in front of and behind the sound.
SoSFFloat	SoVRMLText.maxExtent Deprecated. (Note: Not implemented) Limits and scales all the text strings if the length of the maximum string is longer than the maximum extent.
SoSFFloat	SoVRMLSound.maxFront Deprecated. (Note: Not implemented) Around the location of the emitter, minFront and minBack determine the extent of the full intensity region in front of and behind the sound.
SoSFFloat	SoVRMLCylinderSensor.minAngle Deprecated. Used to clamp rotation_changed events to a range of values.
SoSFFloat	SoVRMLSound.minBack Deprecated. (Note: Not implemented) Around the location of the emitter, minFront and minBack determine the extent of the full intensity region in front of and behind the sound.
SoSFFloat	SoVRMLSound.minFront Deprecated. Around the location of the emitter, minFront and minBack determine the extent of the full intensity region in front of and behind the sound.
SoSFFloat	SoVRMLCylinderSensor.offset Deprecated. Amount to add to the rotation event value.
SoSFFloat	SoVRMLDisk2D.outerRadius Deprecated. Specifies the outer radius of the disk.
SoSFFloat	SoVRMLAudioClip.pitch Deprecated. Multiplier for the rate at which sampled sound is played.
SoSFFloat	SoVRMLSound.priority Deprecated. (Note: Not implemented) Controls which sound is heard when more than one sound is active.
SoSFFloat	SoVRMLLoadSensor.progress Deprecated. Output event.
SoSFFloat	SoVRMLArc2D.radius Deprecated. Specifies the radius of the arc.
SoSFFloat	SoVRMLArcClose2D.radius Deprecated. Specifies the radius of the arc.
SoSFFloat	SoVRMLCircle2D.radius Deprecated. Specifies the radius of the arc.
SoSFFloat	SoVRMLCylinder.radius Deprecated. Specifies the cylinder's height and radius; values must be greater than 0.0.
SoSFFloat	SoVRMLPointLight.radius Deprecated. (Note: Not implemented) Meters from the location the light can illuminate.
SoSFFloat	SoVRMLSphere.radius Deprecated. Radius of the sphere.
SoSFFloat	SoVRMLSpotLight.radius Deprecated. (Note: Not implemented) Specifies the radial extent of the solid angle and the maximum distances from location that may be illuminated by the light source.
SoSFFloat	SoVRMLTextureTransform.rotation Deprecated. Specifies a rotation in radians of the texture coordinates about the center after the scale has taken place.
SoSFFloat	SoVRMLMaterial.shininess Deprecated. Shininess coefficient of the surface.
SoSFFloat	SoVRMLFontStyle.size Deprecated. Specifies the height of glyphs rendered and helps determine the spacing of adjacent lines.
SoSFFloat	SoVRMLFontStyle.spacing Deprecated. Specifies the distance (in the negative y direction) between the base points of successive strings, measured with respect to the current font height.
SoSFFloat	SoVRMLMovieTexture.speed Deprecated. Indicates how fast the movie should be played.
SoSFFloat	SoVRMLNavigationInfo.speed Deprecated. (Note: Not implemented) The rate at which the viewer travels through a scene.
SoSFFloat	SoVRMLArc2D.startAngle Deprecated. Specifies the start angle of the arc.
SoSFFloat	SoVRMLArcClose2D.startAngle Deprecated. Specifies the start angle of the arc.
SoSFFloat	SoVRMLMaterial.transparency Deprecated. Transparency value of the surface.
SoSFFloat	SoVRMLNavigationInfo.visibilityLimit Deprecated. (Note: Not implemented) Sets the furthest distance the user is able to see.
SoSFFloat	SoVRMLFog.visibilityRange Deprecated.
SoSFFloat	SoVRMLGridShape.xSpacing Deprecated. Distance between the vertices in the X direction.
SoSFFloat	SoVRMLGridShape.zSpacing Deprecated. Distance between the vertices in the Z direction.

Uses of SoSFFloat in com.openinventor.ldm.nodes

Fields in com.openinventor.ldm.nodes declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoTransferFunction.fauxShadingDarkenThreshold Opacity threshold for darkening edges.
SoSFFloat	SoTransferFunction.fauxShadingLength Controls how many color values will be affected by faux shading.
SoSFFloat	SoTransferFunction.fauxShadingStrength Controls how much faux shading will darken the color values of the transfer function.
SoSFFloat	SoGeometryPriority.priority Geometry priority between 0 and 1 inclusive.
SoSFFloat	SoLDMResourceParameters.tileHalfLife Tile half-life (seconds).

Uses of SoSFFloat in com.openinventor.medical.nodes

Fields in com.openinventor.medical.nodes declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	Gnomon.cameraDistance Specifies the distance from the camera to the gnomon geometry.
SoSFFloat	SliceOrientationMarkers.fontSize Specify the font size in pixels (default is 17).
SoSFFloat	TextBox.fontSize Specify the font size in pixels (default is 15).
SoSFFloat	Ruler.globalFactor Specifies a scale factor applied to the size of the arrowheads on the line.
SoSFFloat	SliceScaleBar.length Length in normalized screen coordinates (-1 to 1) if not tracking, else length in 3D world coordinates.
SoSFFloat	Magnifier.magnifierFactor Specifies the magnification factor.
SoSFFloat	SliceOrientationMarkers.offset Distance from edge of window to letter.

Uses of SoSFFloat in com.openinventor.meshviz.data

Fields in com.openinventor.meshviz.data declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	PoMeshContouring.annotFontFactor Font size factor of annotations of contour lines.
SoSFFloat	PoMeshContouring.annotFontSize Font size of annotations of contour lines.
SoSFFloat	PoMeshContouring.annotGap Curvilinear distance between two annotations of a same contour line.
SoSFFloat	PoStreamParticleMotion.blinkSpeed Number of animation's cycles per second.
SoSFFloat	PoMesh2DVec.bodyLengthFactor Length (or length multiplicative factor) of the body shape.
SoSFFloat	PoMesh3DVec.bodyLengthFactor Length (or length multiplicative factor) of the body shape.
SoSFFloat	PoMesh2DVec.bodyRadiusFactor Radius (or radius multiplicative factor) of the cylinder.
SoSFFloat	PoMesh3DVec.bodyRadiusFactor Radius (or radius multiplicative factor) of the cylinder.
SoSFFloat	PoMesh.creaseAngle Indicates the minimum angle (in radians) between two adjacent face normals required to form a sharp crease at the edge when default normals are computed and used.
SoSFFloat	PoMesh2DVec.endArrowHeightFactor Height (or Height multiplicative factor) of the arrow shape.
SoSFFloat	PoMesh3DVec.endArrowHeightFactor Height (or Height multiplicative factor) of the arrow shape.
SoSFFloat	PoMesh2DVec.endArrowRadiusFactor The end-arrow's radius is end-arrow's height * endArrowRadiusFactor.
SoSFFloat	PoMesh3DVec.endArrowRadiusFactor The end-arrow's radius is end-arrow's height * endArrowRadiusFactor.
SoSFFloat	PoMesh3DVecGridCrossSection.gridSpacing GridSpacing is relating to the number of points on the grid : the smaller gridSpacing is, the greater the number of points is.
SoSFFloat	PoBaseStreamLine.integrationStepLengthFactor It is a factor of the size of a cell.
SoSFFloat	PoStreamTadpoleMotion.lengthFactor Length factor applied to the velocity.
SoSFFloat	PoMeshLevelSurf.levelValue Value of the level surface.
SoSFFloat	PoStreamLine.lineWidth Convenience field to set the width line attribute of each streamline drawn.
SoSFFloat	PoStreamLineMotion.lineWidth Convenience field to set the width line attribute of each streamline drawn.
SoSFFloat	PoBaseStreamLine.maxLength The curvilinear distance between the start-point and the last point of a streamline must be less than maxLength.
SoSFFloat	PoMesh2DVec.maxLength Maximum length of the vector to be drawn.
SoSFFloat	PoMesh3DVec.maxLength Maximum length of the vector to be drawn.
SoSFFloat	PoBaseStreamLine.maxLifetime The difference between the time of the start-point and the time of the last point of a streamline must be less than maxLifetime.
SoSFFloat	PoMesh2DVec.minLength Minimum length of the vector to be drawn.
SoSFFloat	PoMesh3DVec.minLength Minimum length of the vector to be drawn.
SoSFFloat	PoBaseStreamLine.minSpeed The streamline ends when it goes through a point where the velocity is less than minSpeed.
SoSFFloat	PoCellIndices.offset Factor of the cell's size that specifies the distance of the nodes indices representation to the position of these nodes.
SoSFFloat	PoStreamPointMotion.pointSize Convenience field to set the point size attribute.
SoSFFloat	PoStreamSurface.rakeLength Length of each rake-source.
SoSFFloat	PoStreamParticleMotion.shiftStart Duration from which the first position on the streamline is calculated.
SoSFFloat	PoStreamSphereMotion.sphereRadius Defines the radius of each sphere drawn.
SoSFFloat	PoMesh2DVec.startArrowHeightFactor Height (or Height multiplicative factor) of the arrow shape.
SoSFFloat	PoMesh3DVec.startArrowHeightFactor Height (or Height multiplicative factor) of the arrow shape.
SoSFFloat	PoMesh2DVec.startArrowRadiusFactor The start-arrow's radius is start-arrow's height * startArrowRadiusFactor.
SoSFFloat	PoMesh3DVec.startArrowRadiusFactor The start-arrow's radius is start-arrow's height * startArrowRadiusFactor.
SoSFFloat	PoMeshSides.thresholdValue Defines the limit of the threshold of the mesh sides.
SoSFFloat	PoStreamParticleMotion.timeStep Time step between 2 consecutive points of a streamline.
SoSFFloat	PoMeshProbePoint.tolerance Tolerance used to locate the position of the probe inside a cell of the mesh.
SoSFFloat	PoStreamTadpoleMotion.width Width of each tadpole segment.

Uses of SoSFFloat in com.openinventor.meshviz.graph

Fields in com.openinventor.meshviz.graph declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	PoCircleArc3CtrPtAngle.angle Arc angle.
SoSFFloat	PoCircleArcCtrPtAngle.angle Arc angle.
SoSFFloat	PoAngularAxis.angleStep Angular distance in radians between two graduations.
SoSFFloat	PoPieChartRep.annoDistToCenter Defines the distance from the pie chart center of the displayed annotations (name/value/percentage).
SoSFFloat	PoPieChartRep.annoFontSize Define the font size of the annotation.
SoSFFloat	PoPieChartRep.annoHeightFromSlice Defines the height of the displayed annotations (name/value/percentage) from the top of each slice.
SoSFFloat	PoAxis.arrowHeight Arrow height.
SoSFFloat	PoPieChart.arrowHeight Height of the arrow.
SoSFFloat	PoAxis.arrowLength Arrow length.
SoSFFloat	PoCoordinateSystemAxis.arrowLengthFactor Arrow length scale factor.
SoSFFloat	PoPieChart.arrowWidth Width of the arrow.
SoSFFloat	PoMultipleHistogram.barHeight This field is used only for percentage histogram representation (representation = PERCENTAGE) and it corresponds to the height of the histogram (in this representation, all the bars have the same size).
SoSFFloat	PoHistogram.barSpaceValue Spacing value.
SoSFFloat	PoConicBar.bottomRadius Defines the radius used for each conic bar.
SoSFFloat	PoLegend.boxRatio Ratio between width and height of the colored boxes in the legend.
SoSFFloat	PoTimeAxis.coord Abscissa or ordinate of the axis according to the axis type.
SoSFFloat	PoLogAxis.decadeFontSize Decade graduations font size.
SoSFFloat	PoPolarLogAxis.decadeFontSize Decade graduations font size.
SoSFFloat	PoCartesianAxis.end Defines the end of the axis.
SoSFFloat	PoHistogram.end Define the end point of the histogram.
SoSFFloat	PoAngularAxis.endAngle Angle in radians of the end of the axis.
SoSFFloat	PoCircleArcCtrRadTwoAngle.endAngle End angle.
SoSFFloat	PoPolarAxis.endRadius Radius at the end of the axis.
SoSFFloat	PoPieChart.extAnnotDistance1 Distance from the pie chart center to the end of the arrow.
SoSFFloat	PoPieChart.extAnnotDistance2 Distance from the end of the arrow to the middle of the arrow.
SoSFFloat	PoPieChart.extAnnotDistance3 Distance from the middle of the arrow to the start of the arrow.
SoSFFloat	PoPieChart.extAnnotPercentFontSize Font size of exterior percentages.
SoSFFloat	PoPieChart.extAnnotTextFontSize Font size of exterior texts (texts of sliceText field).
SoSFFloat	PoPieChart.extAnnotValueFontSize Font size of exterior values (values of sliceValue field).
SoSFFloat	PoCurve.fillingThreshold Defines the threshold to fill the curve.
SoSFFloat	PoLabel.fontSize Font size of labels.
SoSFFloat	PoLabelField.fontSize Font size for strings to display.
SoSFFloat	PoAxis.gradDistAxis Distance from the graduations to the axis.
SoSFFloat	PoCartesianAxis.gradEnd Defines the value of the graduation (tick label) corresponding to the end coordinate of this axis.
SoSFFloat	PoAxis.gradFontSize Font size of the graduations.
SoSFFloat	PoCartesianAxis.gradStart Defines the value of the graduation (tick label) corresponding to the starting coordinate of this axis.
SoSFFloat	PoAxis.gridLengthGradOtherSide Grid lines length other side graduation texts.
SoSFFloat	PoAxis.gridLengthGradSide Grid lines length side graduation texts.
SoSFFloat	PoPieChartRep.height Defines the height of the pie chart if the field yValuesIndex is different from -1.
SoSFFloat	PoPointsFieldBars.height Height of parallelepipeds.
SoSFFloat	PoPieChart.intAnnotDistance Distance from the pie chart center to the interior annotation box center.
SoSFFloat	PoPieChart.intAnnotPercentFontSize Font size of interior percentages.
SoSFFloat	PoPieChart.intAnnotTextFontSize Font size of interior texts (texts of sliceText field).
SoSFFloat	PoPieChart.intAnnotValueFontSize Font size of interior values (values of sliceValue field).
SoSFFloat	PoLegend.marginBottom Bottom margin.
SoSFFloat	PoAxis.marginEnd Margin at the end of the axis.
SoSFFloat	PoLegend.marginLeft Left margin.
SoSFFloat	PoLegend.marginRight Right margin.
SoSFFloat	PoAxis.marginStart Margin at the start of the axis.
SoSFFloat	PoLegend.marginTop Top margin.
SoSFFloat	PoCurve.markerXPeriod One point (of the computed curve points) in every markerXPeriod is selected.
SoSFFloat	PoLinearValueLegend.maxValueSize Indicates the maximum size of text values.
SoSFFloat	PoNonLinearValueLegend3.maxValueSize Indicates the maximum size of text values.
SoSFFloat	PoLinearAxis.multFactorDistAxis Distance from the multiplicative factor to the axis.
SoSFFloat	PoLogAxis.multFactorDistAxis Distance from the multiplicative factor to the axis.
SoSFFloat	PoPolarAxis.multFactorDistAxis Distance from the mutiplicative factor to the axis.
SoSFFloat	PoHistogram.nameFontSize Font size of bars names.
SoSFFloat	PoAngularAxis.offset Offset for the axis in radians.
SoSFFloat	PoPolarAxis.offset Offset for the axis.
SoSFFloat	PoArrow.patternHeight Define the height of the start and end arrow pattern.
SoSFFloat	PoArrow3.patternHeight Define the height of the start and end arrow pattern.
SoSFFloat	PoArrow.patternWidth Define the width of the start and end arrow pattern.
SoSFFloat	PoArrow3.patternWidth Define the width of the start and end arrow pattern.
SoSFFloat	PoAngularAxis.radius Radius of the axis.
SoSFFloat	PoCircle3CenterRadius.radius Circle radius.
SoSFFloat	PoCircleArcCtrRadTwoAngle.radius Circle radius.
SoSFFloat	PoCircleCenterRadius.radius Circle radius.
SoSFFloat	PoCylindricalBar.radius Defines the radius used for each cylindrical bar.
SoSFFloat	PoPieChart.radius Radius of the pie chart.
SoSFFloat	PoPieChartRep.radiusMax Defines the maximum radius of the pie chart.
SoSFFloat	PoPieChartRep.radiusMin Defines the mininum radius of the pie chart.
SoSFFloat	PoCurve.raiseThreshold Raise points are vertical lines joining the curve points and the specified threshold.
SoSFFloat	PoCurve.raiseXPeriod One point (of the computed curve points) in every raiseXPeriod is selected.
SoSFFloat	PoPieChart.sliceAngleStep Slice are approximated by a polygon, that is a sequence of straight line segments.
SoSFFloat	PoPieChart.sliceGroupMinValue Threshold underneath the slice are regrouped.
SoSFFloat	PoAngularAxis.startAngle Angle in radians of the origin of the axis.
SoSFFloat	PoCircleArcCtrRadTwoAngle.startAngle Start angle.
SoSFFloat	PoPolarAxis.startRadius Radius at the start of the axis.
SoSFFloat	PoLinearAxis.step Defines the step for the axis.
SoSFFloat	PoPolarLinAxis.step Defines the step for the axis.
SoSFFloat	PoMultipleHistogram.sumFontSize Font size of bars sums.
SoSFFloat	PoPolarAxis.theta Rotation angle of the axis in radians.
SoSFFloat	PoCurveLine.thicknessFactor Defines a multiplicative factor applied to the thickness values.
SoSFFloat	PoBar.threshold Defines the threshold of the origin of the bars.
SoSFFloat	PoCurveFilling.threshold Defines the threshold of the origin of the filled curve.
SoSFFloat	PoLabel.threshold Defines the threshold used to the set position of the label.
SoSFFloat	PoAxis.tickMainLength Main graduations ticks length.
SoSFFloat	PoAxis.tickSubLength Secondary graduations ticks length.
SoSFFloat	PoAxis.titleDistAxis Distance from the title to the axis.
SoSFFloat	PoAxis.titleFontSize Font size of the title.
SoSFFloat	PoLegend.titleFontSize Font size of the title.
SoSFFloat	PoCoordinateSystemAxis.titleTranslationFactor Translation factor of the titles (as function of the length of each vector).
SoSFFloat	PoHistogram.valueFontSize Font size of values.
SoSFFloat	PoCurveFilling.width Defines the width of the curve filled.
SoSFFloat	PoPointsFieldBars.width Width of parallelepipeds.
SoSFFloat	PoRibbon.width Defines the width of the ribbon.
SoSFFloat	PoPieChart3D.zCenter2 Z coordinate of the center of the circle forming the second face of the pie chart.

Uses of SoSFFloat in com.openinventor.meshviz.nodes

Fields in com.openinventor.meshviz.nodes declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	PoBevelEdge.bevelAngle Indicates the minimum angle (in radians) between two adjacent face normals required to bevel the edge common to these two faces.
SoSFFloat	PoDateFormatMapping.coord1 Defines the first coordinate for the association between dates and coordinates (date mapping).
SoSFFloat	PoDateFormatMapping.coord2 Defines the second coordinate for the association between dates and coordinates (date mapping).
SoSFFloat	PoSquareProfile.height
SoSFFloat	PoIntervalCellFilter.max Specifies the max limit of the float interval.
SoSFFloat	PoDataMapping.maxThreshold Maximum threshold value.
SoSFFloat	PoDataMapping.maxThresholdTransparency Transparency associated to values >= maxThreshold.
SoSFFloat	PoIntervalCellFilter.min Specifies the min limit of the float interval.
SoSFFloat	PoDataMapping.minThreshold Minimum threshold value.
SoSFFloat	PoDataMapping.minThresholdTransparency Transparency associated to values <= minThreshold.
SoSFFloat	PoPeriodFilter.period Defines the period used to filter the mesh 1D geometry.
SoSFFloat	PoBevelEdge.radius Indicates the radius of the bevel.
SoSFFloat	PoCircularProfile.radius Radius of the circle defining the profile.
SoSFFloat	PoLinearDataMapping.transparency1 Defines the first transparency of the linear data mapping.
SoSFFloat	PoLinearDataMapping.transparency2 Defines the second transparency of the linear data mapping.
SoSFFloat	PoDataMapping.transparencyValueDeletedParts Each primitive part of which transparency >= transparencyValueDeletedParts, is deleted.
SoSFFloat	PoLinearDataMapping.value1 Defines the first value of the linear data mapping.
SoSFFloat	PoLinearDataMapping.value2 Defines the second value of the linear data mapping.
SoSFFloat	PoSquareProfile.width
SoSFFloat	PoEllipticProfile.xRadius x radius of the ellipse defining the profile.
SoSFFloat	PoEllipticProfile.yRadius y radius of the ellipse defining the profile.

Uses of SoSFFloat in com.openinventor.meshvizxlm.mapping.nodes

Fields in com.openinventor.meshvizxlm.mapping.nodes declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	MoMeshCellShape.factor Field representing the factor to resize extracted cells. A factor lower than one will shrink cells, whereas a factor greater than one will expand cells. The default value is 1.0, which will not resize cells.
SoSFFloat	MoDrawStyle.fadingThreshold Threshold allowing to fade out extra styles of a surface representation as it gets away from the view point. For instance, edges and points displayed on a skin vanish depending of their size on screen.
SoSFFloat	MoMeshIsosurface.isoValue Isovalue to display.
SoSFFloat	MoPredefinedColorMapping.maxValue The max value defining the range of scalar values. The default value is 1.
SoSFFloat	MoPredefinedColorMapping.minValue The min value defining the range of scalar values. The default value is 0.
SoSFFloat	MoMeshCellShape.offset Field representing the distance to shift the display of node names away from the node coordinates. A negative offset will display node names inside the cell, whereas a positive offset will display them outside the cell. Note: The offset is relative to the cell's size if the relativeOffset field is set to true.
SoSFFloat	MoMeshCylinderSlice.radius Specifies the cylinder's radius.
SoSFFloat	MoMeshSphereSlice.radius Specifies the sphere's radius.
SoSFFloat	MoMeshVector.scaleFactor The scale factor to apply to the vector field to resize the representation.
SoSFFloat	MoMeshVector.shiftFactor The shift factor to apply to the representation of each vector.
SoSFFloat	MoMaterial.transparency Transparency value used to display surfaces.

Uses of SoSFFloat in com.openinventor.scaleviz.awt

Fields in com.openinventor.scaleviz.awt declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoComponentBase.stereoBalance Deprecated.
SoSFFloat	SoComponentBase.stereoOffset Deprecated.

Uses of SoSFFloat in com.openinventor.scaleviz.nodes

Fields in com.openinventor.scaleviz.nodes declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoFlatScreen.bottomOverlap bottomOverlap modifies the bottom of the MultiPipe window.
SoSFFloat	SoTracker.defaultObjectBoxMaxDim Radius of a bounding sphere.
SoSFFloat	SoTracker.interEyeDistance Inter-eye distance with respect to the system coordinates.
SoSFFloat	SoFlatScreen.leftOverlap leftOverlap modifies the left side of the MultiPipe window.
SoSFFloat	SoFlatScreen.rightOverlap rightOverlap modifies the right side of the MultiPipe window.
SoSFFloat	SoFlatScreen.topOverlap topOverlap modifies the top of the MultiPipe window.
SoSFFloat	SoTracker.unitScaleFactor A factor that will be applied to all position coordinates retrieved from the tracking system.

Uses of SoSFFloat in com.openinventor.volumeviz.nodes

Fields in com.openinventor.volumeviz.nodes declared as SoSFFloat

Modifier and Type	Field and Description
SoSFFloat	SoVolumeRenderingPhysicalQuality.blurFactor This value controls the intensity of the blurring for the Depth Of Field effect.
SoSFFloat	SoVolumeRenderingQuality.boundaryOpacityIntensity Applies when boundaryOpacity is true.
SoSFFloat	SoVolumeRenderingQuality.boundaryOpacityThreshold Applies when boundaryOpacity is true.
SoSFFloat	SoSlice.bumpScale Specifies the intensity of the bump mapping effect.
SoSFFloat	SoHeightFieldRender.cellOutlineWidth When cellOutline is true, this value specifies the cell outline width in pixels.
SoSFFloat	SoVolumeRenderingQuality.edgeDetect2DInnerThreshold Increase this value to decrease noise on silhouette edges.
SoSFFloat	SoVolumeRenderingQuality.edgeDetect2DOuterThreshold Increase this value to decrease noise on edges in the volume.
SoSFFloat	SoVolumeRenderingQuality.edgeThreshold If this value is low, more edges will be detected.
SoSFFloat	SoVolumeRenderingQuality.gradientThreshold Ignore all gradients with a magnitude less than the specified threshold.
SoSFFloat	SoVolumeRender.lightIntensity Deprecated. As of Open Inventor 8500 See documentation for more details
SoSFFloat	SoVolumeBufferedShape.offset Sets an offset value used for computing the texture coordinates.
SoSFFloat	SoVolumeFaceSet.offset Sets an offset value used for computing the texture coordinates.
SoSFFloat	SoVolumeIndexedFaceSet.offset Sets an offset value used for computing the texture coordinates.
SoSFFloat	SoVolumeIndexedTriangleStripSet.offset Sets an offset value used for computing the texture coordinates.
SoSFFloat	SoVolumeTriangleStripSet.offset Sets an offset value used for computing the texture coordinates.
SoSFFloat	SoOffscreenVolumeRender.opacityThreshold During extraction, voxels with an opacity less than the specified value will be ignored Default is 0.
SoSFFloat	SoVolumeRender.opacityThreshold Specifies a threshold opacity (alpha) value that defines voxels considered to be "solid" (non-transparent).
SoSFFloat	SoVolumeRenderingQuality.segmentedInterpolationThreshold Defines the iso distance used when segmentedInterpolation is true.
SoSFFloat	SoVolumeRenderingQuality.surfaceScalarExponent If this field is greater than or equal to 1, a surface with a small gradient will be less lighted than a surface with a high gradient.
SoSFFloat	SoUniformGridClipping.thickness Defines a clipping thickness in the axis direction.
SoSFFloat	SoUniformGridClipping.undefinedValue Texels in the clipping texture with this value will clip all voxels above and below the surface.
SoSFFloat	SoVolumeRenderingQuality.unnormalizedGradientExponent When unnormalizedGradientExponent is not 0, surfaces with high gradients will be more lighted than surfaces with small gradients.
SoSFFloat	SoVolumeRenderingQuality.voxelOutlineThreshold When voxelOutline is true, this threshold specifies the minimum size of a voxel, in screen pixels, for the voxel outline to be visible.
SoSFFloat	SoVolumeRenderingQuality.voxelOutlineWidth When voxelOutline is true, this value specifies the voxel outline width in pixels.